EPS Sandwich Panel Machine

Detailed Product Description

Introduction
laminator for corrugated sandwich panel mainly consists of a roll forming machine
and a sandwich panel laminating system. Through this line, corrugated sandwich
panels can be produced directly, without the shortcoming that traditional corrugated
sandwich panels have to be laminated manually after the forming of corrugated
sheet. Moreover, both the roll forming machine and the laminating system can
work independently. The roll forming machine of the line consists of feeding system,
roll forming system and cutting system, while the laminating system is made
up of such equipments as uncoiler, feeding, squeezing, gelatinizing, heating, laminating,
edge rolling, edge turn-over, groove-making, edge pruning, pneumatic
device, automatic cutting and PLC. The whole machine possesses advanced working
crafts, merging mechanical and electrical equipments into an organic whole. Annual
production of this line (eight ours a day) is about 600,000 square meters.
Features
1. Beautiful appearance, low noise, high efficiency
2. Multiple function: In addition to corrugated sandwich panels, this line can be
used to produce simple corrugated sheets, and different model sandwich panels.
3. The transmission of the laminating system is achieved by worm and worm gear which
make the laminating speed smooth and steady.
4. The line employs advanced PLC and sets the length and cuts the panel automatically.
5. The main body is welded with type "H"section steel as its material. The surface
is treated by rotoblast.
6. Rollers of the laminating system are covered with rubber, which is advantageous
to the protection of the surface color of galvanized sheets and makes the equipment
laminate steadily.
Main technical specification
1. Size: 42000mm x3600mm x3300mm (Length xWidth xHeight)
2. Total weight: about 25000kg
3. Controlling system: PLC
4. Total power (including heating): about 40kw
5. Working speed: 1000~4000mm/min
6. Suitable working temperature: about 25'C
7. Density of EPS: >18kg/m3
Suitable material for production
Suitable material of out layer: colored galvanized steel sheet
Size: 1000mm (1200mm) x (0.5~0.6)mm x Lmm
Recommended internal material: polystyrene (EPS)
product usage
The products of this line are widely used as the roof and wall of factory, warehouse,
garage, exhibition center, cinema, theatre, gymnasium, civil construction,
stadium, cold storage, etc.